How to CleanWhiteboard
Whiteboards are very useful in various aspects of life, but frequent use can cause marks and colors that are difficult to remove.
Contrary to popular belief, removing these permanent marks from whiteboards is not that hard; all you need is a simple cleaning product likesoapor alcohol. In this section ofSelMagzwe will provide suitable methods for cleaning whiteboards.
Section One: Removing Stubborn Stains
1. Draw new lines over the old ones
Using non-whiteboard markers on these boards will create marks that are very hard to erase. By drawing new lines over the old ones, you can make them easier to clean.
2. Allow the new lines to dry
Once the new lines are dry, use a cloth or special whiteboard eraser to wipe away the old marks; this is because the fresh ink helps to remove the old ink.
3. Repeat this step if needed
To better remove old marks, repeat this process.
Cover the old marks with new lines, then after a few seconds of drying, use a sponge to clean the board.
4. Clean the board
After cleaning the old stains with a cloth dampened in cleaning solution, wipe the board and allow it to dry.
Some of the most popular cleaners include: alcohol, acetone, or nail polish remover, water mixed with soap, glass cleaner, toothpaste,coffee,vinegar, hair spray, hydrogen peroxide, baby wipes, or cooking oils.Section Two: Daily Cleaning
1. Clean the whiteboard every couple of days
Use a damp cloth to clean the marks on the whiteboard at least every two days to prevent them from lingering longer.
2. Clean the board with a cleaning solution
Dampen a clean cloth or sponge with your favorite cleaning solution, and ensure good ventilation if you’re using chemical cleaners. Wipe the board well with the damp cloth.
3. Wipe and dry the board
After cleaning the marks, rinse your cloth or sponge in water, clean the board, and then allow it to dry thoroughly.
Simple Method for Cleaning Stubborn Stains on Whiteboards
Required Items
Clean sponge (whiteboard eraser)
- Water
- Hand sanitizer gel
- Paper towels and alcohol wipes
- Cleaning spray
- Alcohol
- Steps to Follow
First, use the whiteboard eraser to clean the entire surface of the board, then apply hand sanitizer to a paper towel (preferably a roll type) and wipe the whiteboard with it. The alcohol in the towel helps to remove the stains.
After cleaning the whiteboard with the alcohol towel, wipe a dry paper towel over the board.
Some stains on the whiteboard are tougher and are hard to remove. For these stains, alcohol-based cleaning sprays and paper towels are the best choices.
Another recommended method for dealing with these types of stains is to mix equal parts of water and alcohol. Soak a paper towel in the mixture and clean the whiteboard. The key is to ensure the towel is completely soaked in alcohol and to rub it firmly on the stubborn lines and stains.
Finally, let your whiteboard sit outside for at least two hours to air out and dry before using it again.
Whiteboard Stains
